Rotary - Studer OnAir 2500 Operating Instructions Manual

OnAir 2500/OnAir 3000 Digital Mixing Consoles
6.5.22.2

Rotary

Monitoring Rotary Source Selector CR / ST1
OnAir 2500:
CLEAR ALL
6-50 Configuration
The list of sources for the monitor speakers (MON) that can be selected with
the SELECT rotary encoder on the CR (control room) and ST1 (studio 1)
monitoring/talkback modules is defined here.
When touching one of the fields, a selection menu appears that can be scrolled
up and down with the navigation buttons at the upper and lower margins of the
menu (or with the rightmost rotary encoder). In this menu all possible entries
are listed, including MOVE UP, MOVE DOWN, and DELETE buttons for
editing.
All router inputs and outputs may be selected here for monitoring purposes.
Studio 1 not supported.
The top left CLEAR ALL field is colored somewhat brighter than the others; it
can be used to clear all configured monitoring sources at once. If it is touched,
clearing the sources has to be confirmed in a dialog box.
In case that all configured sources should have been cleared inadvertently,
and the current configuration has not been saved yet, they can be restored by
touching the Undo button, as mentioned
SW V3.0
in chapter 6.4.2.
Date printed: 22.07.08