Table of Contents
Advertisement
Why the Industrial Media Converter doesn't connect to the
network
Solution:
Check per port LED on the Industrial Media Converter. Try
another port on the Industrial Media Converter Make sure the
cable is installed properly. And make sure the cable is the right
type to turn off the power. After a while, turn on the power
again.
When I connect IFT-80xT to device with 100BASE-FX
interface, the 100BASE-FX fiber connection fails
Solution:
1. Please check the fiber connection between the two devices is
correct.
2. Please check the 100BASE-FX interface from other devices
run in the same full duplex mode
25
Advertisement
Table of Contents
