Points Of Interest - Suunto AMBIT3 VERTICAL 1.0 User Manual

3.27 Points of interest

Suunto Ambit3 Vertical includes GPS navigation which allows you to
navigate to a pre-defined destination stored as a point of interest
(POI).
NOTE: You can also navigate when you are recording an
exercise (see 3.11.7 Navigating during exercise).
To navigate to a POI:
1. Press [Start Stop] to enter the start menu.
2. Scroll to NAVIGATION using [Start Stop] and enter with [Next].
3. Scroll to POIs (Points of interest) with [Light Lock] and select
with [Next].
The watch displays the number of saved POIs and free space
available for new POIs.
4. Scroll to the POI you wish to navigate to with [Start Stop] or
[Light Lock] and select with [Next].
5. Press [Next] to select Navigate.
If you are using the compass for the first time, you need to
calibrate it (see
compass, the watch starts searching for a GPS signal and
indicates when the signal is acquired.
6. Start navigating to the POI. The watch displays the following
information:
indicator showing the direction to your target (see further
•
explanation below)
3.8.1 Calibrating compass ). After activating the
69