Firmware Updates; Fusedalti - Suunto AMBIT3 VERTICAL 1.0 User Manual

3.13 Firmware updates

You can update your Suunto Ambit3 Vertical software through
Movescount. When you update the software, all logs are
automatically moved to Movescount and deleted from the watch.
To update your Suunto Ambit3 Vertical software:
1. Install Moveslink if you have not done so already.
2. Connect your Suunto Ambit3 Vertical to your computer with the
supplied USB cable.
3. If an update is available, your watch is updated automatically.
Wait for the update to complete before unplugging the USB
cable.

3.14 FusedAlti

TM
FusedAlti
GPS and barometric altitude. It minimizes the effect of temporary
and offset errors in the final altitude reading.
NOTE: By default, altitude is measured with FusedAlti during
exercises that use GPS and during navigation. When GPS is switched
off, altitude is measured with the barometric sensor.
When the device is in TIME mode, you can search a new reference
for barometric altitude with FusedAlti. This activates the GPS for a
maximum of 15 minutes.
To search for a new altitude reference value with FusedAlti:
1. Keep [Next] pressed to enter the options menu.
36
provides an altitude reading that is a combination of