HAKO Sweepmaster P1200 RH Instruction Manual page 45

Maintenance and Care
Hako-System Maintenance S (Safety
check)
The following maintenance works are to
be performeded by authorized Hako
Service-Centre at least once yearly.
Discription of task
Perform maintenance works according to Hako-System Maintenance II and III
Change hydraulic fluid and filter
Engine: adjust valve and change seal of valve cover
Check fixing screws (brake, steering wheel and lifted up disposal) and tighten if
required (Safety check)
Check braking system (Safety check)
For LPG-version (Germany): Expert opinion yearly (BGV D 34) (Safety check)
Check steering wheel (Safety check)
Test drive and function test of safety components
Interval
every 500 hours of operation
o
o
o
o
o
o
o
o
45