Section 16: Installing The Windows - Hangar 9 Cessna 182 Skylane Instruction Manual

Section 16: Installing the Windows

Parts Needed
• Windshield and windows (6 pieces total)
• Fuselage
• Screws (4)
Step 1: Using scissors, trim on the cut line etched in the
windshield.
Step 2: Trial fit the windshield and side windows in place. It
may be necessary to slightly trim the edges of the windows so
they fit properly. When you are satisfied with the fit, run a small
bead of canopy glue around the side windows. Tape them in
place until dry.
Tools and Adhesives Needed
• Canopy glue (e.g., R/C 56 or Pacer Formula 560)
• Scissors
• Masking tape
• Small Phillips screwdriver
Step 3: The front and rear windshields are further secured by
using the screws provided. Holding the windshields in place
with masking tape may be helpful.
Note: Be sure the canopy glue has cured completely before
attaching the screws.
43