Table of Contents
Advertisement
Chapter 1 Introduction
The SAS-to SATA II RAID Subsystem
The subsystem is a "Host Independent" RAID
subsystem supporting RAID Levels 0, 1, 3, 5, 6,
0+1, and JBOD. Regardless
of the RAID level the subsystem is configured
for, each RAID array consists of a set of disks
which to the user appears to be a single large
disk capacity.
The subsystem is also equipped with an
environment controller which is capable of
accurately monitoring the internal environment
of the subsystem such as its power supplies,
temperatures and voltages. The disk trays
allow you to install any type of 3.5-inch hard
drive. Its modular design allows hot-swapping
of hard drives without interrupting the
subsystem's operation.
Highest Density Available
Small Desktop Tower with 8 bay carriers
Support Over 2TB
Extraordinary performance
SATA II: The Next Generation Internal Storage Interconnect.
Better connectivity, higher data transfer rates.
Advanced Data Guarding technology (RAID ADG) provides the highest level of data
protection.
RAID ADG (RAID 6) can tolerate multiple simultaneous drive failures without
downtime or data loss.
Exceptional Manageability
Graphic User Interface (GUI) carry out user easy to remote management and
configuration
Menu-driven interface make user a convenient way to maintain the storage by locally
LCD front console
Easy Installation, upgrade & Maintenance
Provide a fast and easy way to install and upgrade the storage. Simplified
maintenance reduces ongoing IT labor costs.
SAS-to-SATA II RAID Subsystem
Installation and Configuration Manual
8
Advertisement
Table of Contents
