Modify Password; Upgrade Firmware; Restart Controller - Sans Digital Mobileraid MR8X Detailed User's Manual

SAS-to-SATA II RAID Subsystem

4.5.9 Modify Password

To change or disable the RAID subsystem's admin password, click on the Change
Password link under the System Controls menu. The Modify System Password screen
appears.
The factory-default admin password is set to 00000000. Once the password has been set,
the user or administrator can only monitor and configure the RAID subsystem by providing
the correct password.
The password is used to protect the RAID subsystem's configuration from unauthorized
access. The RAID controller will check the password only when entering the Main Menu
from the initial screen. The RAID subsystem will automatically go back to the initial
screen when it does not receive any command after sometime.
To disable the password, enter only the original password in the Enter Original
Password box, leave both the Enter New Password and Re-Enter New Password
boxes blank. After selecting the Confirm The Operation option and clicking the Submit
button, the system password checking will be disabled. No password checking will occur
when entering the main menu from the starting screen.

4.5.10 Upgrade Firmware

Please refer to Section 4.8 for more information.

4.5.11 Restart Controller

Use this function to restart the RAID Controller.
69
Installation and Configuration Manual