Table of Contents
Advertisement
8 . Configure the settings as follows:
" Function, arrow and ctrl keys act as": Terminal Keys
"Backspace key sends": Crtl + H
"Emulation": VT100
"Telnet terminal ID": VT100
"Back scroll buffer lines": 500
Click OK.
9.
Now, the VT100 is ready to use. After you have finished the VT100 Terminal setup, you
may press t h e "X" key (in your Terminal) to link the RAID subsystem and Terminal
together. Press "X" key to display the disk array Monitor Utility screen on your VT100
Terminal.
10. The Main Menu will appear.
Keyboard Function Key Definitions
"A" key - to move to the line above
"Z" key - to move to the next line
"Enter" key - Submit selection function
"ESC" key - Return to previous screen
"L" key - Line draw
"X" key – Redraw
SAS-to-SATA II RAID Subsystem
Installation and Configuration Manual
30
Advertisement
Table of Contents
