Table of Contents
Advertisement
SAS-to-SATA II RAID Subsystem
3.4 Web browser-based Remote RAID management via R-Link
Ethernet Port
The RAID subsystem can be configured with RAID Manager, a web browser-based
application which utilizes the web browser installed on your operating system. The web
browser-based RAID Manager can be used to manage all the RAID function.
To configure the RAID subsystem on a remote machine, you need to know its IP Address.
Launch your web browser by entering http://[IP Address] in the remote web browser.
IMPORTANT! The Ethernet default IP is "192.168.001.100". DHCP
function is "Enabled". You can configure the correct IP Address through
the LCD panel or the terminal "Ethernet Configuration" menu.
Note that you must be logged in as administrator with local admin rights on the remote
machine to remotely configure it. The RAID subsystem controller default User Name is
"admin" and the Password is "00000000".
39
Installation and Configuration Manual
Advertisement
Table of Contents
