System Controls; System Configuration - Sans Digital Mobileraid MR8X Detailed User's Manual

4.5

System Controls

4.5.1 System Configuration

To set the RAID s ub system system configuration options, c lic k the S y st em Co nfig
li nk und e r t he S y ste m C ontro ls me nu. The System Configuration screen will be
shown. Set the system configuration option as needed.
System Beeper Setting:
This option is used to Disabled or Enable the subsystem's RAID controller alarm beeper.
Background Task Priority:
The Background Task Priority indicates how much time and system resource the RAID
controller devotes to a background task, such as a rebuild operation. The RAID subsystem
allows user to choose the background task priority (High 80%, Medium 50%, Low 25%,
and Ultra Low 5%) to balance between background task process and Volume Set
access. For high R A I D s u b s y s t em performance, specify a low value.
Terminal Port Configuration:
Baud Rate setting values are 1200, 2400, 4800, 9600, 19200, 38400, 57600, and
115200. Use 115200 for the RAID subsystem terminal port speed setting.
Stop Bits values are 1 and 2. Use 1 for the RAID subsystem Stop Bit setting.
NOTE: Parity value is fixed at None. Data Bits value is fixed at 8 bits.
SAS-to-SATA II RAID Subsystem
Installation and Configuration Manual
60