SAS-to-SATA II RAID Subsystem
4.5.2 EtherNet Config
To set the Ethernet configuration, click the EtherNet Config link under the System
Controls menu. The RAID subsystem EtherNet Configuration screen will be shown. Set the
desired configuration. Once done, tick on the Confirm The Operation and click the
Submit button to save the settings.
4.5.2.1 DHCP Host Name Support
If DHCP Function is "Enabled" and the DHCP server supports host name function, the SNMP
configuration "sysName.0" can be set.
To use DHCP Host Name in SNMP:
1. Enable DHCP Function.
2. In SNMP Configuration, set the "sysName.0".
63
Installation and Configuration Manual