Creating New Raid Set Or Reconfiguring An Existing Raid Set - Sans Digital Mobileraid MR8X Detailed User's Manual

4.7 Creating New Raid Set or Reconfiguring an Existing Raid Set

You can configure Raid Sets and Volume Sets using Quick Create or Raid Set
Functions/Volume Set Functions configuration method. Each configuration method
requires a different level of user input. The general flow of operations for Raid Set and
Volume Set configuration is:
Step Action
1 Designate hot spare disk/pass-through disk (optional).
2 Choose a configuration method.
3 Create Raid Set using the available physical drives.
4 Define Volume Set using the available raw capacity in the Raid
5 Initialize the Volume Set. Then use Volume Set in the Host OS.
SAS-to-SATA II RAID Subsystem
Installation and Configuration Manual
74