Table of Contents
Advertisement
11.Channellndication Mode
11.Channellndication Mode
This mode displays just the bank and channel number of a memory channel,
instead of frequencies, and limits other functions in the memory mode.
1.Memories must have been registered previously.
2.Set the transceiver to the memory mode and turn it off.
3.Turn
th~
transceiver on while pressing
the
~
and the [PTT] keys.
The1c!isPlay will be shown as on the right.
To exit the channel indication mode, turn the
transceiver off, and turn it on while pressing
the
tfJ3
and the [PTI] keys.
00
CH-O
I I
bank
memory channel
as~
..
MEMO
·When the transceiver is in the channel indication mode, operations are
limited to changing the banks and channels, adjusting the volume,
adjusting the squelch, MONIIMUTE function operations, memory scan
operations and keylock operations.
·When a channel name is registered, the channel name will be displayed.
·Even when the transceiver is reset, the channel indication mode can't be
released unless the procedure described above is performed.
103
Advertisement
Table of Contents
