Technical Data; Transportation; Transportation In Vehicle; Starting Operation - WAGNER ProSpray 27 Operating Manual

Description of unit

3.5 Technical data

Voltage:
Max. current consumption:
Fuses:
Unit connecting line:
Acceptance capacity:
Max. operating pressure:
Volume flow at 120 bar
(12 MPa) with water:
Max. tip size:
Max. temperature of the
coating material:
Max. viscosity:
Filter insert
(standard outfitting):
Weight:
Max. tire pressure:
Special high-pressure hose:
Dimensions (L x W x H):
Max. sound pressure level:
* Place of measuring: 1 m in distance from the unit and 1.6
m above the floor, 120 bar (12 MPa) operating pressure,
reverberant floor.

3.6 Transportation

Pushing or pulling the unit
Pull out the handle (Fig. 3, Item 1) until it will come no
further. Insert the handle – push the buttons (2) on the
spars, and then push in the handle.
2
30
ProSpray 27 ProSpray 31
230 V AC, 50 Hz
7.5 A 8.7 A
16 A time-lag
3 x 1.5 mm – 6 m
2
1725 Watts 2000 Watts
230 bar (23 MPa)
2.7 l/min 3.1 l/min
0.027 inch 0.031 inch
– 0.69 mm – 0.79 mm
43°C
30.000 mPa·s
mesh 60
39 kg
2 bar (0.2 MPa)
DN 6 mm, 15 m connecting
thread M 16 x 1.5
655 x 825 x 640 mm
79 dB (A) *
1
2
g

3.7 Transportation in vehicle

Roll the high-pressure hose over the suspension device
at the handle.
Secure the unit with a suitable fastening.

4. Starting operation

4.1 High-pressure hose, spray gun and
separating oil
1. Screw the manometer combination (2) at the coating
material outlet (Fig. 4, Item 1).
2. Screw the transition socket (3) to the manometer
combination.
3. Screw the high-pressure hose (4) to the manometer
combination.
4. Screw the spray gun (5) with the selected tip onto the
high-pressure hose.
5. Tighten the union nuts at the high-pressure hoses
firmly so that coating material does not leak.
5
Starting operation
1
2
3
4
ProSpray 27 • 31