Dsc Operation; Dsc Address Id - Icom IC-M506EURO Instruction Manual

7

DSC OPERATION

DSC address ID

■
D Programming Individual ID
A total of 100 DSC address IDs can be programmed and as-
signed a name of up to 10 characters.
Enter "INDIVIDUAL ID" in the DSC SETTINGS menu.
q
➪ DSC SET
MENU
(Push [MENU]) (Select icon)
Push [ADD].
w
• The "INDIVIDUAL ID" program screen is displayed.
Enter a desired individual ID in the following way:
e
• Select a desired number using [Y]/[Z]/[Ω]/[≈].
• Push [ENT] or dial to set it.
• To move the cursor, rotate dial or select either arrow, "←" or "→,"
then push [ENT] or dial.
• Push [EXIT] to return to the normal operating mode.
• Push [BACK] to return to the previous screen.
The first digit is '0,' and the second digit is other than '0'
for a Group ID.
The first two digits are '0' for any Coast station ID.
r Repeat step e to enter all 9 digits.
18
➪ Individual ID
(Rotate dial, then push [ENT].)
After entering the 9 digit code, push [ENT] or dial to set it.
t
• The ID name programming screen is displayed.
Enter a desired 10 digit ID name in the following way:
y
• Select a desired character using [Y]/[Z]/[Ω]/[≈].
• Push [ENT] or dial to set it.
• To move the cursor, rotate dial or select either arrow, "←" or "→,"
then push [ENT] or dial.
• Push [123], [!$?] or [ABC] to select a character group.
After entering the ID name, select "FINISH" using [
u
[Ω]/[≈], then push [ENT] to program it.
• The "INDIVIDUAL ID" list screen is displayed.
Push [MENU] to exit the MENU screen.
i
Y]/[Z]/