Connections And Maintenance; Connections - Icom IC-M506EURO Instruction Manual

12

CONNECTIONS AND MAINTENANCE

Connections

■
q
w
e
q ANTENNA CONNECTOR
Connects to a marine VHF antenna with a PL-259 connector.
CAUTION: Transmitting without an antenna may dam-
age the transceiver.
w GROUND TERMINAL
Connects to a vessel ground to prevent electrical shocks
and interference from other equipment occurring. Use a
self tapping screw (3 × 6 mm: not supplied).
e NMEA 0183 IN/OUT LEADS
Brown: Talker B (Data-L), NMEA In (–)
White: Talker A (Data-H), NMEA In (+)
Connect to NMEA In lines of a PC or NMEA 0183 (ver. 2.0
or later) sentence format DSC, DSE compatible navigation
equipment, to receive position data from other ships.
94
Green: Listener B (Data-L), NMEA Out (–)
Yellow: Listener A (Data-H), NMEA Out (+)
Connect to NMEA Out lines of a GPS receiver for position
i
data.
u
• A NMEA 0183 ver. 2.0 or later RMC, GGA, GNS, GLL and VTG
sentence format compatible GPS receiver is required. Ask your
dealer about suitable GPS receivers.
y
r AF OUT LEADS
t
Blue:
r
Black:
Connect to an external speaker.
Orange:
Gray:
Connect to a Hailer.
• Hailer output power: More than 25 W with a 4 ˘ load
DO NOT connect the black or grey leads to the ground.
These leads must be connected to the External speaker
(–) or Hailer (–) lines.
NOTE for NMEA In/Out and AF Out leads:
The connectors are attached to keep the leads together.
Before connecting to a piece of equipment, you should cut
the leads to remove the connector.
External Speaker (+)
External Speaker (–)
Hailer (+)
Hailer (–)