Adjusting The Backlight Level; Aquaquake Water Draining Function - Icom IC-M506EURO Instruction Manual

4
BASIC OPERATION

Adjusting the Backlight level

■
The function display and keys can be backlit for better visibil-
ity under low light conditions.
The backlight is adjustable in 7 levels and OFF.
Depending on the preprogramming, the adjustment method
differs, as described below.
Push [BKLT] to show the backlight adjustment screen. Ro-
➥
tate dial or push [∫]/[√]/[Ω]/[≈] to adjust the brightness of
the LCD and key backlight, and then, push [ENT].
• If no key operation is performed for about 5 seconds, the transceiver
sets the selected backlight level, and returns to the normal mode.
14
AquaQuake water draining
■
function
The AquaQuake water draining function clears water away
from the speaker grill. Without this function, water may muffle
the sound coming from the speaker. A buzzing sound is heard
when this function is activated.
q Push [MENU].
w Rotate dial or push [Ω]/[≈] to select the "AQUA QUAKE,"
icon and then push the softkey below the icon.
• AQUAQUAKE screen is displayed.
While holding down [AQUA], the AquaQuake function is
➥
activated to clear water away from the speaker grill.
• While holding down [AQUA], a low buzzing sounds to drain wa-
ter, regardless of the volume level setting.
• The transceiver keys, except [DISTRESS], are disabled while
the AquaQuake function is activated.
When the AquaQuake function is activated.