12/03 Rev. 3.00-01
Strain relief
Demounting / mounting
1. Remove guard ring (1).
2. Remove strain-relief profile (2) and
springs (3).
Demounting of the axis:
3. Detach back cover.
Regarding this point, see the section
"Housing".
4. Take out the mainboard.
Regarding this point, see the section
"Printed circuit boards".
5. Loosen the fastening screw (4) of the
axis (hexagon socket).
Tools
-- Hexagon socket, 5 mm
SERVICE MANUAL
TTX 350
General Service
2
3
4
8
1