12/03 Rev. 3.00-01
Material unwinder
General
The
material
unwinder
unwinder (1) and the strain relief (2). The
strain relief has the purpose of compensating
the jolting material movements which can
occur if large speed increases or decreases
(braking) in the material feeding rate occur.
The unwinder itself is braked and adjustable
to various core diagonals.
Unwinder
Demounting / mounting
1. Remove material guide disc and take off
adapter rings
1. Remove guard ring (3).
2. Remove the entire unwinder core (4).
When mounting:
Pay attention to easy accessibility and
check the brake (where necessary,
lubricate the unwinder axis).
Tools
– Screwdriver
SERVICE MANUAL
TTX 350
consists
of
the
General Service
2
1
3
4
7