Table of Contents
Advertisement
12/03 Rev. 3.00-01
Transformer
Demounting / mounting
1. Detach the back cover.
Regarding this point, see the section
"Housing".
2. Disconnect the transformer connection
cables. This includes the connections on
the mains-connection socket and on the
printed circuit board.
You can find details on the printed circuit
board
connections
"Service / Printed circuit boards".
The connections on the mains-
connection socket can be found in the
same section.
3. Loosen the fastening screw (2) in the
base tray (hexagon socket).
Dispenser version:
Remove the material unwinder. Loosen
the fastening screw (3) in the printer's
partition wall (hexagonal).
Regarding removal of the material
unwinder, see the section of the same
name.
4. If necessary, remove the transformer (1)
and use a new transformer.
Tools
– Hexagon socket wrench 5 mm
-- Socket wrench size 10
SERVICE MANUAL
TTX 350
in
the
section
1
2
11
General Service
3
Advertisement
Table of Contents
