Table of Contents
Advertisement
12/03 Rev. 3.00-01
Front-left housing
Demounting / mounting
1. Detach the back cover.
2. Unscrew the earth cable (1) of the cutter
connection from the floor of the housing
(hexagon socket).
3. Disconnect the three plug connections
of the earth connection from the
peripheral board. Loosen the fixtures of
the connection cable. For this, clip
through the cable binders (diagonal
cutter).
4. Disconnect the ribbon contact of the
display on the mainboard. Remove the
cable attachments (cable binders).
5.
Loosen the three Phillips screws (2).
Continued on the next page
SERVICE MANUAL
TTX 350
General Service
1
2
2
2
4
Advertisement
Table of Contents
