Checking The Measurement Results - Yamaha CX-A5100 Owner's Manual

1 2 3 4 5 6 7 8 9 10 11 12
SOURCE SOURCE RECEIVER RECEIVER
AV AV
1 1 2 2 3 3 4 4
5 5 6 6 7 7
V-AUX V-AUX
AUDIO AUDIO
1 1 2 2 3 3 4 4
TUNER TUNER BLUETOOTH BLUETOOTH USB USB NET NET
PHONO PHONO MULTI MULTI [ A ] [ A ] [ B ] [ B ]
SCENE SCENE
1 1 2 2 3 3 4 4
PROGRAM PROGRAM MUTE MUTE VOLUME VOLUME
TOP MENU TOP MENU POP-UP/MENU POP-UP/MENU
ON SCREEN ON SCREEN OPTION OPTION
Cursor keys
ENTER
ENTER
RETURN RETURN DISPLAY DISPLAY
MODE MODE
LIVE LIVE
CLASSICAL CLASSICAL CLASSICAL ENTERTAI T T N ENTERTAIN
CLUB CLUB
PRESET PRESET
MOVIE MOVIE STEREO STEREO STRAIGHT STRAIGHT
TV TV
PURE PURE
INPUT INPUT
DIRECT DIRECT
TV VOL TV VOL TV CH TV CH
MUTE MUTE
5
Use the cursor keys to select "Save/Cancel" and
press ENTER.
• To check the measurement results, select "Result". For details, see
"Checking the measurement results" (p.53).
6
To save the measurement result, use the cursor
keys to select "SAVE" and press ENTER.
The adjusted speaker settings are applied.
• To finish the measurement without saving the result, select "CANCEL".
7
Use the cursor keys (e/r) to select "YES" or "NO"
to enable/disable YPAO Volume and press ENTER.
• If YPAO Volume is enabled, the high- and low-frequency levels are
automatically adjusted according to the volume so that you can enjoy
natural sounds even at low volume.
• You can also enable/disable YPAO Volume in "YPAO Volume" (p.108) in the
"Option" menu.
8
Disconnect the YPAO microphone from the unit.
This completes optimization of the speaker settings.
Caution
• The YPAO microphone is sensitive to heat, so should not be placed anywhere
where it could be exposed to direct sunlight or high temperatures (such as on
top of AV equipment).

Checking the measurement results

You can check the YPAO measurement results.
1
After the measurement, use the cursor keys to
select "Result" and press ENTER.
• You can also select "Result" from "Auto Setup" (p.121) in the "Setup" menu,
which displays the previous measurement results.
The following screen appears.
1
1
Measurement result items
2
Measurement result details
3
The number of measured positions (when multi
measure is performed)
53
En
2
3