Checking The Measurement Results; Reloading The Previous Ypao Adjustments - Yamaha CX-A5200BL Owner's Manual

MAIN 2 3 4 MAIN 2 3 4
SLEEP SLEEP ZONE ZONE
PARTY T T PARTY PURE DIRECT PURE DIRECT HDMI OUT HDMI OUT
SCENE SCENE
1 1 2 2 3 3 4 4
5 5 6 6 7 7 8 8
INPUT INPUT
TUNER TUNER NET NET USB USB BLUETOOTH BLUETOOTH
PRESET PRESET
RED RED GREEN GREEN YELLOW YELLOW BLUE BLUE
SETUP
Cursor keys
ENTER
RETURN
TOP TOP POP-UP POP-UP
HOME HOME
MENU MENU / / MENU /MENU
AI AI
SUR. DECODE SUR. DECODE
PROGRAM PROGRAM VOLUME VOLUME
ENHANCER ENHANCER
STRAIGHT STRAIGHT
MEMORY MEMORY
TUNING TUNING BAND BAND TUNING TUNING

Checking the measurement results

You can check the YPAO measurement results.
1
After the measurement, use the cursor keys to select
"Measurement result" and press ENTER.
X
You can also select "YPAO Result" (p.125) from "Speaker" (p.121) in the "Setup"
menu, which displays the previous measurement results.
The following screen appears.
a
a
Measurement result items
b
Measurement result details
c
The number of measured positions (when multi measure is
performed)
2
Use the cursor keys to select an item.
Polarity of each speaker
Wiring
Reverse: The speaker cable may be connected with the
reverse polarity (+/-).
Size of each speaker (cross-over frequency of the
subwoofer)
Large: The speaker can reproduce low-frequency signals
Size
effectively.
Small: The speaker cannot reproduce low-frequency
signals effectively.
Distance Distance from the listening position to each speaker
Level Output level adjustment for each speaker
Angle
(horizontal)
Height
X
• "Angle (horizontal)" and "Height" show the results when angle/height
measurement is performed.
• If there are speakers that cannot be detected, check the power amplifier
settings and connections.
3
To finish checking the results and return to the previous
screen, press RETURN.

Reloading the previous YPAO adjustments

b
When the speaker settings you have configured manually are not
suitable, follow the procedure below to discard the manual settings and
c
reload the previous YPAO adjustments.
1
In the "Setup" menu, select "Speaker" and then "YPAO
Result" (p.125).
2
Use the cursor keys to select "Setup Reload" and press
ENTER.
3
To exit from the menu, press SETUP.
53
En
Horizontal angle of each speaker at the listening position
Height of the presence speakers above the level of the
listening position