Yamaha CX-A5100 Owner's Manual page 98

■
Connecting an HDMI-compatible device to play back
videos/audio
Connect an HDMI-compatible device (such as a TV) to play back videos/audio at
Zone2 or Zone4. If you connect an AV amplifier, you can enjoy multichannel playback in
another room (Zone4).
• To watch videos played back on a video device at Zone2 or Zone4, you need to connect the video device to
the unit with an HDMI cable (p.35).
• We recommend that you disable HDMI Control on the playback devices connected to the unit.
• On-screen operations are not available for Zone2 and Zone4.
HDMI OUT 2
The unit (rear) (ZONE OUT) jack
2
HDMI OUT
(HDCP2.2)
2 1 (ZONE OUT)
(ZONE OUT) ARC
HDMI
MULTI CH INPUT AV 1 AV 2 AV 3 AV 4
(1 BD/DVD)
CENTER
L
R
SURROUND SUR. BACK SUBWOOFER
PHONO AUDIO 1 AUDIO 2 AUDIO 3
(2 TV)
L
R
GND 1 OPTICAL 2 OPTICAL 3 COAXIAL 4 COAXIAL 5 COAXIAL 6 OPTICAL
AUDIO 4
REAR FRONT
L
R R R
PRESENCE PRESENCE
Main zone
(Example: using a TV)
HDMI input
HDMI
HDMI
Zone2 or Zone4
(Example: using an AV amplifier)
HDMI input
HDMI
HDMI
Zone4
To assign the HDMI OUT 2 (ZONE OUT) jack to Zone2 or Zone4, set "HDMI OUT2 Assign"
(p.139) in the "Setup" menu to "Zone2" or "Zone4".
• When the HDMI OUT 2 (ZONE OUT) jack is assigned to Zone2, you can enable/disable the audio output
from the HDMI OUT 2 jack by setting "Audio Output" (p.139) in the "Setup" menu to "On" or "Off" (default).
• Videos/audio interruptions may happen in another zone when any of the following operations is
performed.
– Tuning on/off a TV connected to the unit via HDMI or switching the TV input
– Enabling/disabling a zone output or selecting its input source
– Changing the sound mode or audio settings
98
En