Yamaha CX-A5100 Owner's Manual page 151

■
SOURCE SOURCE RECEIVER RECEIVER
You can use the unit's remote control to operate playback devices if
you have registered their remote control codes. You can also use
AV
1 2 3 4
the input selection keys to change the playback devices that are
5 6 7 V-AUX
controlled by the remote control, because their remote control
AUDIO
Input selection keys
1 2 3 4
codes are assigned to the input selection keys.
TUNER BLUETOOTH USB NET
PHONO MULTI [ A ] [ B ]
SCENE SCENE
1 1 2 2 3 3 4 4
• Under the unit's default settings, the amplifier code (Yamaha: 5098) is set for all
VOLUME VOLUME
PROGRAM PROGRAM MUTE MUTE
• If you have registered the remote control code for an external device to the [A] or
TOP MENU TOP MENU POP-UP/MENU POP-UP/MENU
ON SCREEN ON SCREEN OPTION OPTION
1
Cursor keys
ENTER
ENTER
RETURN RETURN DISPLAY DISPLAY
SUR. SUR.
MODE ENHANCER ENHANCER PARTY PARTY HDMI OUT HDMI OUT
DECODE DECODE
INFO INFO MEMORY MEMORY FM FM AM AM
LIVE
1 CLASSICAL 2 3 ENTERTAIN
CLUB
PRESET TUN./ CH TUN./ CH
4 MOVIE 5 STEREO 6 STRAIGHT
Numeric keys
TV
PURE
7 8 9 SLEEP SLEEP 2
INPUT
DIRECT
TV VOL TV CH
MUTE 10 0 ENT LEVEL LEVEL
SETUP
ZONE ZONE SETUP
3
Registering the remote control codes for
playback devices
the input selection keys. With this setting, you can control HDMI
Control-compatible devices connected to the unit with the remote control. (This
function may not work depending on the specification of the external device.)
[B] key, you can operate the device with the remote control without switching the
input source after pressing the key.
Refer to "List of remote control codes" in the
CD-ROM to find the remote control code for your
playback device.
• If there are multiple remote control codes, register the first code in the list. If
that does not work, try the other codes.
Press SETUP.
Perform each of the following steps within 30 seconds.
Otherwise, the setting will be canceled. If this happens,
repeat from Step 2.
Use the cursor keys (q/w) to select "PRESET" and
press ENTER.
PRESET
4
Press a corresponding input selection key and
press ENTER.
For example, press AV1 to set the remote control code for
the playback device connected to the AV1 jack.
Code currently registered
5
Use the numeric keys or cursor keys to enter the
4-digit remote control and press ENTER.
Once the remote control code is successfully registered,
"OK" appears in the display window.
If "ERROR" appears, registration has failed. Repeat from
Step 3.
6
To set another remote control code, repeat Steps 4
and 5.
7
To exit from the setup menu, press SETUP.
• For details on how to register a remote control code to a SCENE key, refer to
"Configuring scene assignments" (p.68).
151
En
5098