Yamaha CX-A5100 Owner's Manual page 61

1 2 3 4 5 6 7 8 9 10 11 12
SOURCE SOURCE RECEIVER RECEIVER
RECEIVER z
AV AV
1 1 2 2 3 3 4 4
5 5 6 6 7 7
V-AUX V-AUX
AUDIO AUDIO
1 1 2 2 3 3 4 4
TUNER TUNER BLUETOOTH BLUETOOTH USB USB NET NET
PHONO PHONO MULTI MULTI [ A ] [ A ] [ B ] [ B ]
SCENE SCENE
1 1 2 2 3 3 4 4
PROGRAM PROGRAM MUTE MUTE VOLUME VOLUME
ON SCREEN
TOP MENU TOP MENU POP-UP/MENU POP-UP/MENU
ON SCREEN OPTION OPTION
Cursor keys
ENTER
ENTER
RETURN RETURN DISPLAY DISPLAY
MODE MODE
LIVE LIVE
CLASSICAL CLASSICAL CLASSICAL ENTERTAI T T N ENTERTAIN
CLUB CLUB
PRESET PRESET
MOVIE MOVIE STEREO STEREO STRAIGHT STRAIGHT
TV TV
PURE PURE
INPUT INPUT
DIRECT DIRECT
TV VOL TV VOL TV CH TV CH
MUTE MUTE
■
C: Using other connection methods
If your wireless router (access point) does not support WPS push
button configuration method, follow the procedure below to
configure the wireless network settings.
1
Press RECEIVER z to turn on the unit.
2
Turn on the TV and switch the TV input to display
video from the unit (HDMI OUT jack).
• Operations with TV screen are available only when your TV is connected to
the unit via HDMI.
3
Press ON SCREEN.
4
Use the cursor keys to select "Setup" and press
ENTER.
5
Use the cursor keys (e/r) to select "Network".
6
Use the cursor keys (q/w) to select "Network
Connection" and press ENTER.
7
Use the cursor keys (q/w) and ENTER to check
"Wireless (Wi-Fi)" and select "OK".
• The checkmark indicates the current setting.
8
Use the cursor keys (q/w) and ENTER to select the
desired connection method and select "NEXT".
The following connection methods are available.
WPS Button
Share Wi-Fi
Settings (iOS)
Access Point
Scan
Manual Setting
PIN Code
61
En
You can set up a wireless connection with the WPS
button while viewing the TV screen. Follow the
instructions displayed on the TV screen.
See "Sharing the iOS device setting" (p.58).
You can set up a wireless connection by searching
for an access point. For details on settings, see
"Searching for an access point" (p.62).
You can set up a wireless connection by entering
the required information (such as SSID)
manually. For details on settings, see "Setting up
the wireless connection manually" (p.62).
You can set up a wireless connection by entering
the unit's PIN code into the wireless router (access
point). The method is available if the wireless
router (access point) supports the WPS PIN code
method. For details on settings, see "Using the PIN
code" (p.63).