Hdmi; Audio Output - Yamaha CX-A5100 Owner's Manual

Av pre-amplifier
Hide thumbs Also See for CX-A5100:
Table of Contents

Advertisement

HDMI

Configures the HDMI settings.
HDMI Control
Enables/disables HDMI Control (p.177).
Settings
Off
Disables HDMI Control.
Enables HDMI Control.
On
Configure the settings in "TV Audio Input", "ARC" and "Standby Sync".
• To use HDMI control, you need to perform the HDMI Control link setup (p.177) after connecting HDMI
Control-compatible devices.
TV Audio Input
Selects an audio input jack of the unit to be used for TV audio input when "HDMI
Control" is set to "On". The unit's input source automatically switches to TV audio
when the TV input is switched to its built-in tuner.
Settings
AUDIO 1–3
Default
AUDIO 1
• When using ARC to input TV audio to the unit, you cannot use the input jacks selected here for
connecting an external device because the input will be used for TV audio input.
ARC
Enables/disables ARC (p.178) when "HDMI Control" is set to "On".
Settings
Off
Disables ARC.
On
Enables ARC.
• You do not need to change this setting normally. In case noises are produced from the speakers
connected to the unit because TV audio signals input to the unit via ARC are not supported by the
unit, set "ARC" to "Off" and use the TV's speakers.
Standby Sync
Select whether to use HDMI control to link the standby behavior of the TV and the
unit when "HDMI Control" is set to "On".
Settings
Off
Does not set the unit to standby mode when the TV is turned off.
On
Sets the unit to standby mode when the TV is turned off.
Sets the unit to standby mode when the TV is turned off only when the
Auto
unit is receiving TV audio or HDMI signals.

Audio Output

Selects a device to output audio.
• The "Amp" and "HDMI OUT1" settings are available only when "HDMI Control" is set to "Off".
• The "HDMI OUT2" setting is available only when "HDMI OUT2 Assign" (p.139) is set to "Main".
Amp
Enables/disables the audio output from the speakers and headphones connected
to the unit.
Settings
Off
Disables the audio output from the speakers and headphones.
On
Enables the audio output from the speakers and headphones.
133
En

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents