Yamaha CX-A5100 Owner's Manual page 108

Av pre-amplifier
Hide thumbs Also See for CX-A5100:
Table of Contents

Advertisement

Item
Function
FM Mode
Switches between stereo and monaural for FM radio
(FM Mode)
reception.
(U.K. and Europe models only)
Traffic Program
Automatically searches for a traffic information
(TrafficProgram)
station.
Shuffle
Configures the shuffle setting for the iPod (p.83),
(Shuffle)
USB storage device (p.86), or media server (p.90).
Repeat
Configures the repeat setting for the iPod (p.83),
(Repeat)
USB storage device (p.86), or media server (p.90).
Tone Control (Tone Control)
Adjusts the high-frequency range (Treble) and low-frequency range (Bass) of sounds.
Choices
Treble (Treble), Bass (Bass)
Setting range
-6.0 dB to Bypass (Bypass) to +6.0 dB, 0.5 dB increments
• If you set an extreme value, sounds may not match those from other channels.
• You can also adjust the "Tone Control" setting with the front panel controls by pressing TONE/BALANCE
repeatedly to select "Treble" or "Bass", and PROGRAM to make an adjustment.
YPAO Volume (YPAO Volume)
Page
Enables/disables YPAO Volume or Adaptive DRC.
111
YPAO Volume (YPAO Vol.)
77
Enables/disables YPAO Volume. When YPAO Volume is enabled, the high- and
low-frequency levels are automatically adjusted according to the volume so that
you can enjoy natural sounds even at low volume.
Settings
Off (Off)
Disables YPAO Volume.
On (On)
Enables YPAO Volume.
• YPAO Volume works effectively after the measurement results of "Auto Setup" have been already
saved (p.45).
• We recommend enabling both YPAO Volume and Adaptive DRC when you are listening at lower
volumes or at night.
Adaptive DRC (A.DRC)
Sets whether the dynamic range (from maximum to minimum) is automatically
adjusted when the volume level is adjusted. When it is set to "On", it is useful for
listening to playback at a low volume at night.
Settings
Off (Off)
On (On)
If "On" is selected, the dynamic range becomes narrow at a low volume and wide
at a high volume.
Volume: low
On
Off
Input level
108
En
The dynamic range is not automatically adjusted.
Automatically adjusts the dynamic range when YPAO Volume is
enabled.
Volume: high
On
Off
Input level

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents