Intertek Jotul GF 400 DV Sebago Installation And Operation Instructions Manual page 26

137750_Rev_L 11.16.12
Figure 45. Attach Blower to the Mounting
Bracket with the wingscrew and connect
wires to Snapstat and female control
quickconnect.
Blower Operation
The optional variable-speed blower will enhance heat
circulation around the firebox and out into the room. The
blower is controlled by a heat activated switch (snap-
stat) that will ONLY function when the control switch
is in AUTO setting. After the fire has been burning for a
time, the snapstat will react to the heat and activate the
blower. Fan speed may be manually adjusted with the
rheostat knob. If the burner turns off, the blower will be
shut off automatically when the stove cools down.
If automatic blower circulation is not desired, place
the blower control switch in the MANUAL position.
26
Wingscrew
Figure 46. Blower Controls
G
W
G
BL
BK
POWER
GY
SUPPLY
P P
BL
GY
AUTO OFF MANUAL
Figure 47. Blower Wiring Diagram
Snapstat
Connectors
Male Quick-
connector
to Female Quick-
connector
Blower Speed
Control
BLOWER
W
BK
BK BK
P
BK
BK BK
P
RHEOSTAT
SNAPSTAT
BR
P
P = QuickConnector Pin
BR
SWITCH