Balance Control (Preset); Remote Control - Luxman C-1000f Owner's Manual

Remote Control

6. Mute (Volume).
Mute mode is indicated by the active Legend flashing.
MUTE
Press MUTE again to restore sound. Mute does not affect recordings made using the Tape outputs
(REC OUT) but will affect the signal going to the Preamplifier output (Pre Out).
Dimmer
7. (Display) Cycles through four levels of intensity:
Normal Dim
→
Output Channel Preset Depends on which Output Mode is selected.
8.
UnBalanced and Balanced offer
controls: LR Balance → L-Ηi R−Ηi (Output Balance between the two different outputs)
→ LR Balance (Channel Balance between the two different L & R channels)
BALANCE Control will adjust the Balance between the Left and Right channels. Plus or
minus 8 dB.
PRESET - Balance
i. Press PRESET once, LR Balance will appear.
ii. Press ENTER once,
L-CH R-CH
0 dB
Press the MUTE Button to temporarily lower the sound to the speakers.
Dimmest Display Off
→ →
LR Balance . While Bi-Amp Cycles through two
0 dB
Normal.
→
1
1