Luxman C-1000f Owner's Manual page 10

Remote Control
3. Output Mode
will illuminate which outputs are active on the front panel display.
4. Balanced Output Phase Invert
blue LED shows that the phase is inverted.
5. Volume Control;
VOLUME control adjusts the overall loudness of the signals being fed to the loudspeakers.
It is electronic with 72 discrete steps and can be adjusted from the remote control handset.
IN : BAL. -1
VOL: --dB
At this setting the volume is turned off. You can raise the volume using the
button.
You should acquire the habit of lowering the volume, when changing between inputs or
before playing a record.
cycles between modes: BAL
; this will invert the phase from where it is set. The
adjust the Volume Control for the desired listening level. The
Bi-Amp UNBAL
→ → → .
The blue LEDs

volume
1
0