Luxman C-1000f Owner's Manual page 8

Rear Panel Controls
19. MAIN POWER Switch. If you are not using your C-1000f for an extended period of time
and want to turn off the power completely. The remote control will not be able to activate
the control amplifier.
20. LINE PHASE SENSOR. Here is a clever device found on the back of almost every Luxman
powered product. You press the button and it will check the phase of the electricity it is
receiving. If the AC outlet in the wall is incorrectly wired, meaning the live and neutral are
swapped, a red LED will turn on to warn you. You only need to press it once, when you are
installing a product to check that everything is in order. It's a simple mistake, that occurs
often, and one that can undermine your listening enjoyment.
21. AC INLET Connect the C-1000f power cord to a live AC outlet. Refer to information on the
back panel to deter-mine the correct voltage.
8