Installation - Luxman C-1000f Owner's Manual

Installation

The C-1000f can be placed upright on a table or shelf, standing on its four feet. It also can be
custom installed in piece of furniture or cabinet of your choice.
Always provide adequate ventilation for your C-1000f. Cool operation ensures the longest possible
operating life for any electronic instrument. Do not install the C-1000f directly above a heat generat-
ing component such as a high powered amplifier. If all the components are installed in a single
cabinet, a quiet running ventilation fan should be utilized to maintain all the system components at
.
the coolest temperature
Allow at least 2' above the control amplifier, 2" all around.
SINGLE ENDED INPUT & OUTPUT CONFIGURATION (LINE -1)
INPUT
OUTPUT MODE
VOLUME
BAL INVERT
LR BALANCE
MUTE
DIMMER
BALANCED INPUT & OUTPUT CONFIGURATION (BAL -1)
INPUT
OUTPUT MODE
VOLUME
BAL INVERT
LR BALANCE
MUTE
DIMMER
LINE -1
UNBALANCE
-36dB
INVERT
L-CH:0dB, R-CH: 0dB
OFF
MAX
BAL -1
BALANCE
-36dB
INVERT
L-CH:0dB, R-CH: 0dB
OFF
MAX
1
5