Specifications - Luxman C-1000f Owner's Manual

C-1000f Specifications
Input Sensitivity / Input
Impedance
Output / Output
Impedance
Total Harmonic
Distortion
Frequency Response
S / N Ratio
Input
Output
Auxiliary Equipment
Power Consumption
Dimensions, Weight
Accessories Supplied
Single-ended / mV/47.5K 300 ohms, Balanced / mV/67.0K 300 Ω
Single-ended / rated 1 V/564 Ω maximum 5.8 V,
Balanced / rated 1 V/600 Ω maximum 6.2 V
Single-ended / 0.009% (20 Hz ~ 20KHz),Balanced / 0.018% (20 Hz ~
20KHz)
20 Hz to 20KHz (+0, - 0.1dB), 5Hz to 116KHz (+0, - 3.0dB)
Single-ended / 123 dB (A-IHF), Balanced / 120 dB (A-IHF)
5 x RCA Single-ended, 2 x XLR Balanced inputs
2 x RCA Single-ended, 2 x XLR Balanced outputs
Front Panel Stand-by / Operate Switch, Input Selector
Volume Control and monitor switch, Output Mode &
Balanced Invert.
Rear Panel Main power switch and signal ground post
Remote Output RJ-11 (two) Phase-line sensor,
AC inlet.
Remote Stand-by / Operate Switch, Input Selector
Control Volume up / down, mute, output mode, phase invert,
functions balance,
tone controls, REC output
21 W (Normal Operation), 2.3 W (Standby)
440 (W) x 117 (H) x 407 mm (D), 29 lbs (13.0Kg)
Remote Control (RA-60), power cables (JPA-10000)
Display Dimmer, preset controls,
2
3