Table of Contents
Advertisement
When Finisher SR4020 is installed:
When you select a stapling position, Sort is automatically selected.
3.
Press [OK].
4.
Enter the number of copy sets using the number keys.
5.
Place the originals, and then press the [Start] key.
• When placing an original on the exposure glass, start with the first page to be copied. When placing
originals in the ADF, set so that the first page is on the top.
• When placing originals on the exposure glass, or in the ADF using Batch mode, press the [ ] key
after all the originals have been scanned.
• If you specify Staple: Center, you must specify the Magazine function. For details about Magazine,
see "Booklet/Magazine".
• You can change the staple positions shown on the initial display under Input/Output in User Tools.
For details, see "Copier/Document Server Features", General Settings Guide.
• For details about the number of sheets that can be stapled together, and the number of stapled copies
that can be stacked on each tray, see "Supplementary Information".
• p.185 "Booklet/Magazine"
• p.248 "Supplementary Information"
Finishing
2
89
Advertisement
Table of Contents
