Table of Contents
Advertisement
2.
Select the stamp color, and then press [OK].
Changing the stamp position
Changes the stamp position.
1.
Press [Change] under Stamp Position.
2.
Select the stamp position, and then press [OK].
Specifying the first printing page and start number ("P1,P2...", "-1-,-2-...", "P.1,P.2...
", "1,2... ")
Specify the first printing page and start number.
The example below shows when the first printing page is "2" and the start number is "3".
In the following procedure, "P1, P2..." is selected, but the procedure is the same regardless of the format
you select.
1.
Press [Change] under Change Numbering.
BAS080S
Stamps
4
155
Advertisement
Table of Contents
