Selecting Copy Paper - Toshiba e-STUDIO 5530C Pro Operating Instructions Manual

Selecting Copy Paper

Select paper you want to copy onto.
There are two ways to select copy paper:
Auto Paper Select
The machine selects a suitable size of copy paper automatically based on the detected original size
and the reproduction ratio you select.
Manual Paper Select
Select the tray containing the paper you want to copy onto: a paper tray, the bypass tray or the LCT.
See the following table for original sizes and orientations that can be used with Auto Paper Select (when
copying at a ratio of 100%):
Metric version
Original location
Exposure glass
ADF
Inch version
Original location
Exposure glass
ADF
• Only the paper trays set to [No Display] or [Recycled Paper] in Paper Type and also set to [Yes] in
Apply Auto Paper Select under Tray Paper Settings can be selected in Auto Paper Select mode. For
details, see "System Settings", General Settings Guide.
• p.28 "Sizes difficult to detect"
Original size and orientation
A3 , B4 JIS , A4 , B5 JIS
A3 , B4 JIS , A4 , B5 JIS
1
× 17 , 8 / × 11 , 8
2
Original size and orientation
1
11 × 17 , 8 / × 14 , 8
2
A3 , A4 , 11 × 17 , 8
1 1
5 / × 8 / , 10 × 14 , 7
2 2
Selecting Copy Paper
1
, 8 / × 13 , 8K , 16K
2
, A5 , B6 JIS
1
/ × 13
2
1
/ × 11
2
1 1
/ × 14 , 8 / × 11
2 2
1 1
/ × 10 /
4 2
4
, 11
,
131