Table of Contents
Advertisement
3.
Set the originals on the main machine.
4.
Make the necessary settings using the main machine.
If you have made any copy settings before using Connect Copy, the settings remain effective.
However, if optional finishers are not installed on either one of the two, the Stack, Staple, Punch and
Z-fold functions are automatically disabled.
5.
Enter the number of copies with the number keys.
The maximum copy quantity that can be set is 9999.
6.
Press the [Start] key on the main machine.
Copying starts if the main machine is not in use. The sub-machine starts copying after data transfer
from the main machine is completed.
7.
Collect your copies from both the main and sub machines.
• To cancel Connect Copy mode, press [Connect Copy], which is highlighted on the main machine.
• Since the sub-machine starts copying after receiving data from the main machine, the numbers of
copy sets differ on the main and sub machines. If the transferred data is massive, the difference between
the numbers of copies made by the main machine and sub-machine will increase.
• Both machines may not finish copying at the same time.
• When the number of originals or copies is small, copying will be done on only the main machine.
• When using the Sort/Staple function, copying is divided between the two machines by the number
of sets. If a paper misfeed occurs when processing a set of copes, it is not possible for the other machine
to take over the remainder of that particular set.
• When placing originals on the exposure glass, or in the ADF using Batch mode, press the [ ] key
after all the originals have been scanned.
• To interrupt ADF scanning, press the [Clear/Stop] key on the main machine, and then select [Stop].
• To stop copying, press the [Clear/Stop] key on the main machine, and then select [Stop].
• When the memory to store originals exceeds the maximum, an error message appears. For details,
see "When You Cannot Make Copies As Wanted", Troubleshooting.
• p.34 "Batch Mode"
Using Connect Copy
5
209
Advertisement
Table of Contents
