Table of Contents
Advertisement
4. Advanced Copying
2.
Select [Copy] or [Blank] for the front cover.
3.
Select [Copy] or [Blank] for the back cover, and then press [OK].
4
4.
Select the main sheet tray that contains the paper to copy the originals.
5.
After making all settings, press [OK] twice.
• The back cover sheet should be the same size and orientation as the main sheets.
• You can use paper of different size and orientation than the main sheets as the front cover sheet.
• When stapling copies with the front cover whose size and orientation is different from the main sheets,
the front cover sheet should be the same width in paper feed direction as the main sheets. For example,
when the main sheet is A5 , you can staple the copies with the front cover sheet of A4 , but you
cannot staple them with that of A4 .
• When you specify both front and back covers, the first and last pages of your original are copied on
paper specified for use as a cover, or cover sheets are inserted before the first copy and after the last
copy.
• You can make a combined copy on the front cover sheet. For details about Front Cover Copy in
Combine, see "Copier/Document Server Features", General Settings Guide.
• For details about the interposer, see "Loading Paper", Troubleshooting.
Designate
Use this function to have certain pages of your original copied onto designation sheets or to insert a
designation sheet for each page specified.
• Copy
194
Advertisement
Table of Contents
