Table of Contents
Advertisement
• You cannot use the bypass tray with this function.
• If you select staple without having the stapler cartridge for saddle stitch set in Finisher SR4020, a
paper misfeed might occur. Be sure to set the stapler cartridge.
Original orientation and stapling position
Place all the originals in the ADF in the orientation in which they can be read normally. When placing
the original on the exposure glass, keep the same orientation, but set the original facing downwards.
The relationship between the orientation in which you place the original and the staple positions is as
follows:
BAS056S
Finishing
2
87
Advertisement
Table of Contents
