Advertisement
Quick Links
Advertisement
Related Manuals for Ledj INTENSE 12D4 CW
Summary of Contents for Ledj INTENSE 12D4 CW
-
Page 1: User Manual
INTENSE 12D4 CW/WW LED SLIM PANEL Order code: LEDJ253 User manual... -
Page 2: Safety Instructions
LEDJ Intense 12D4 CW/WW LED Slim Panel Safety WARNING FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! CAUTION! Keep this equipment away from rain, moisture and liquids. SAFETY INSTRUCTIONS Every person involved with the installation, operation & maintenance of this... -
Page 3: Operating Determinations
LEDJ Intense 12D4 CW/WW LED Slim Panel Safety IMPORTANT: The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual or any unauthorised modification to the equipment. • Never let the power-cable come into contact with other cables. Handle the power-cable and all mains voltage connections with particular caution! •... - Page 4 Setup Operating Instructions The Intense 12D4 CW/WW is a DMX-512 controllable, full CW/WW colour mixing Par Can made up of high efficiency 4W LED’s. There are two colour groups (cool white and warm white) whose intensity can be controlled individually allowing the creation of an unlimited range of colour temperatures.
- Page 5 LEDJ Intense 12D4 CW/WW LED Slim Panel Operations DMX mode: To access the DMX mode, press the “MODE” button on the LED display to show “d001” on the LED display. Now press the “ENTER” button and use the “UP” and “DOWN” buttons to set the desired DMX address setting from “d001 - d512”.
- Page 6 LEDJ Intense 12D4 CW/WW LED Slim Panel DMX Charts DMX charts: 2 channel DMX chart: CHANNEL VALUE FUNCTION 0-255 Cool white 0-100% 0-255 Warm white 0-100% 4 channel DMX chart: CHANNEL VALUE FUNCTION 0-255 Cool white 0-100% 0-255 Warm white 0-100%...
- Page 7 DATA Cable (DMX cable) requirements (for DMX operation): • The LEDJ Intense 12D4 CW/WW can be controlled via DMX-512 protocol. The DMX address is set on the back of the unit. Your unit and your DMX controller require a standard 3-pin XLR con- nector for data input/output (figure 1).
- Page 8 LEDJ Intense 19T3 RGB LED Slim Panel DMX Set up DATA Cable (DMX cable) requirements (for DMX operation): • The Intense Series can be controlled via DMX-512 protocol. The DMX address can be set on the back of the fixture. Your fixture and your DMX controller require a standard 3-pin XLR connector for data input/output (figure 1).
- Page 9 LEDJ Intense 12D4 CW/WW LED Slim Panel Notes Notes:...
- Page 10 LEDJ Intense 12D4 CW/WW LED Slim Panel Notes Notes:...
- Page 11 LEDJ Intense 12D4 CW/WW LED Slim Panel Notes Notes:...