Calibration Of Controls For Maneuvering - Husqvarna PG820 RC Operator's Manual

Calibration of controls for maneuvering

The controls on the remote and the control panel must be
recalibrated if the machine starts to make involuntary
movements without maneuvering. Calibration is done with
the remote control.
• For calibration of the various controls, go to the menu
for each function. Browse with the arrow keys and
confirm with "OK".
• "MINIMUM", the minimum value is the default value of
each function.
SERVICE
CALIBRATION
SPEED
Jan 05
MINIMUM
0% (0%)
MAXIMUM
100%
SPEED , remote control
• Turn the knob to '0' (A) for the minimum value and
confirm with 'OK' (B). Select 'MAXIMUM' (C), arrow
key down. Turn the knob to maximum value (hare) (D)
and confirm with 'OK'.
Jan 05
MINIMUM
0% (0%)
MAXIMUM
100%
A
• Return to the previous menu with the 'Back' key.
20 – English
12:45
12:45
C
E
B
D
OPERATING
DISC , remote control
• Turn the knob anticlockwise to stop (A) for the
minimum value and confirm with 'OK' (B). Select
"CENTER" (C), arrow key down (D). Turn the knob
until it "clicks" and the knob is pointing straight up (E)
and confirm with "OK" (B). Select 'MAXIMUM' (F),
arrow key down (D). Turn the knob clockwise to stop
(G) for the maximum value and confirm with 'OK' (B).
A
• Return to the previous menu with the 'Back' key.
HEAD , remote control
• Calibrated the same way as 'DISC'.
JOYSTICK X , remote control
• Move the joystick straight left (A) and hold it there to
simultaneously confirm with 'OK' (B), 'MINIMUM'.
Arrow key down (C), 'MAXIMUM' (D). Do the same on
the right (E) and confirm with 'OK' (B).
D
E
MINIMUM
0% (50%)
CENTER
50%
MAXIMUM
100%
G
Jan 05 12:45
MINIMUM
0% (50%)
CENTER
50%
MAXIMUM
100%
C
B
Jan 05 12:45
C
F
D
B
A E