Preparation For Storage - Honda PIONEER SXS700 Owner's Manual

14 SXS700-31HL36000.book 185 ページ ２０１３年５月１４日 火曜日 午前１０時５９分

Preparation for Storage

Refer to Safety Precautions on page 91.
1. Change the engine oil and filter (page 118).
2. Make sure the cooling system is filled with a 50/50% antifreeze
solution (page 127).
3. Fill the fuel tank. Make sure the fuel fill cap is properly installed.
4. To prevent rusting in the cylinder, perform the following:
• Disconnect the spark plug cap from the spark plug.
• Remove the spark plug.
Do not connect the spark plug to the spark plug cap.
• Pour a tablespoon (15 – 20 cc) of clean engine oil into the
cylinder and cover the spark plug hole with a piece of cloth.
• Turn the ignition switch to the START (p) position and crank
the engine several times to distribute the oil.
• Reinstall the spark plug and spark plug cap.
Storing Your Honda
(cont'd)
Tips 185