Spark Plug - Honda PIONEER SXS700 Owner's Manual

14 SXS700-31HL36000.book 144 ページ ２０１３年５月１４日 火曜日 午前１０時５９分

Spark Plug

Spark Plug Recommendation
standard spark plug
Use only the recommended type of spark plug in the recommended
heat range.
NOTICE
Using spark plugs with an improper heat range can cause engine
damage.
Spark Plug Inspection & Replacement
Refer to Safety Precautions on page 91.
1. Remove the front seat (page 108) and left side rubber dust cover.
2. Clean any dirt from around the spark plug base.
3. Disconnect the spark plug cap. Take care to avoid damaging the
spark plug wire when disconnecting the cap.
4. Using a spark plug wrench provided in the tool kit, remove the
spark plug.
5. Inspect the electrodes and center porcelain for deposits,
corrosion, or carbon fouling. If the corrosion or deposits are
heavy, replace the plug. Clean a carbon or wet-fouled plug with
a plug cleaner, if available, or a wire brush. Inspect the spark plug
electrodes for wear. The center electrode should have a flat tip
and sharp edges, and the side electrode should not be eroded. If
the electrodes and insulator tip appear unusually fouled or
burned, we suggest that you contact your dealer.
6. Discard the spark plug if there is apparent wear or if the insulator
is cracked or chipped.
144 Servicing Your Honda
BKR5E-11 (NGK) or
K16PR-U11 (DENSO)