Tilt Bed Lever - Honda PIONEER SXS700 Owner's Manual

14 SXS700-31HL36000.book 58 ページ ２０１３年５月１４日 火曜日 午前１０時５９分
Cargo Bed Controls

Tilt Bed Lever

Before raising the cargo bed, select a firm level surface and set the
parking brake.
Your Honda SXS has a tilt bed lever, on the left front side of the bed.
Using the lever, the front end of the bed will lift up, making it easier
to dump items out the rear or to maintain the air cleaner, lubricate
the cargo bed pivots and cargo bed strikers.
To raise the front of the cargo bed, first make sure that the tailgate
has been unlatched and lowered, then pull up the lever.
4 Person Model:
Make sure the rear seats are stowed in place before raising the cargo
bed. The cargo bed should not be raised with the rear passenger
jump seats deployed. The cargo bed should not be raised with
passengers seated in the rear seats.
1. Pull up the tilt bed lever, then grasp the top of the bed.
2. Raise the front end of the cargo bed.
Do not drive the Honda SXS with the front end of the cargo bed
raised.
4 Person Model:
Do not open the rear doors while the cargo bed is raised. Opening
the rear doors while the cargo bed is raised, will cause the seats to
flip up unexpectedly.
58 Instruments & Controls