Selecting A Shift Position; Selecting A Drive Mode - Honda PIONEER SXS700 Owner's Manual

14 SXS700-31HL36000.book 76 ページ ２０１３年５月１４日 火曜日 午前１０時５９分
Basic Operation
To stop the engine, turn the ignition switch to the OFF (w) position.
Remember to apply the parking brake and remove the key if you
plan to leave the vehicle.

Selecting a Shift Position

You can drive your vehicle either forward or backward by moving the shift
lever from neutral (N) to drive (D) or reverse (R).
Remember, to avoid damaging the transmission, move the shift lever
only when the vehicle is stopped and the engine is idling.
See page 32 for additional information.

Selecting a Drive Mode

2WD This mode supplies power to the rear wheels only, this
mode is best for surfaces with good traction.
4WD This mode supplies power to the front and rear wheels.
Steering will require slightly more effort than with
2WD. This mode is recommended for driving on
surfaces with relatively poor traction.
4WD This mode supplies power to the front and rear wheels,
(Diff Lock) and locks the front differential. As a result, steering will
require extra space and effort. Select this mode for
maximum traction.
Before using the drive mode select lever to change from one mode
to another, be sure the vehicle is stopped and the engine is idling.
See page 33 for additional information.
76 Basic Operation & Driving Guidelines