Honda PIONEER SXS700 Owner's Manual page 185

14 SXS700-31HL36000.book 177 ページ ２０１３年５月１４日 火曜日 午前１０時５９分
Finishing Touches
Refer to Safety Precautions on page 91.
After washing your Honda SXS, consider using a commercially
available spray cleaner/polish or quality liquid or paste wax to finish
the job. Use only a non-abrasive polish or wax made specifically for
motorcycles or automobiles. Apply the polish or wax according to
the instructions on the container.
(USA & Canada only)
If a surface on your Honda SXS is chipped or scratched, your dealer
has touch-up paint to match your Honda SXS's color. Be sure to use
your Honda SXS's color code (page 213) when you buy touch-up
paint.
If the frame has a chip that exposes the metal, first apply primer (to
prevent corrosion) and then apply the touch-up paint. Several thin
layers of touch-up paint are better than one thick coat.
Exhaust Pipe and Muffler Maintenance
Refer to Safety Precautions on page 91.
The exhaust pipe and muffler are stainless steel but may become
stained by mud or dust.
To remove mud or dust, use a wet sponge and a liquid kitchen
abrasive, then rinse well with clean water. Dry with chamois or a soft
towel.
If necessary, remove heat stains by using a commercially available
fine texture compound. Then rinse by the same manner as removing
mud or dust.
Appearance Care
Servicing Your Honda 177