Group Listening; Message - AT&T Merlin 1030 User Manual

Group Listening

To let others in the room hear your telephone conversation:
Without hanging up your handset, touch Speaker.
You can speak to the other person only through your handset
unless you have a Hands-Free Unit (see "Hands-Free Unit,"
page 50).
NOTE: Before hanging up, touch Speaker again. This prevents
a squeal from the speaker as your handset comes close to it.

MESSAGE

Your MERLIN system attendant can let you know that a
message is waiting for you by turning on the light next to
Message.
If you have a 5-button voice terminal, you do not have a Message
button. However, you can program a button to act as a Message
button (see "Basic Programming Instructions," page 16, and the
Feature Programming Chart on page 55).
To turn off the message light:
Touch Message.
You can set up a messaging system between your voice terminal
and another voice terminal using the Notify feature (see "Notify,"
page 17). The Notify feature works independently of the
Message feature.
Speaker
Message
14