Speaker; On-Hook Dialing; Monitor-On-Hold - AT&T Merlin 1030 User Manual

SPEAKER

You can use your voice terminal's speaker to monitor a call as
you dial it, to monitor a call on hold, and to let a group listen to
your conversation.

On-Hook Dialing

Instead of using your handset to listen while you place a call,
you can use your voice terminal's built-in speaker:
Touch Speaker.
The green light next to Speaker goes on, and you hear a dial tone
through your voice terminal's speaker
Dial the number.
When you hear the other person answer, lift your handset.
If the line is busy, or if you get no answer:
Touch Speaker to cancel the call.
You can use On-Hook Dialing any time instructions tell you to
lift your handset before dialing. Simply touch Speaker instead
of lifting your handset.

Monitor-on-Hold

When you've been put on hold, you can hang up and continue
working while you wait for the person to return to the call:
Touch Speaker.
Hang up.
When you hear the other person return to the call, lift your
handset.
Speaker
+ +
outside
number
Speaker
Speaker
+ +
13